CAS 750 Multiparameter Monitor
Designed with the leading technology you trust, this compact, portable monitor is ideal for a variety of patient monitoring applications including emergency care, transport, in-hospital applications, outpatient care and procedural sedation.

Small, Lightweight and Technologically Advanced.
At 4.4 lbs (2kg), the CAS 750 is one of the world’s smallest and lightest multi-parameter monitors. It was especially designed for the way you work today. With this one small unit, you can monitor all the key parameters quickly and easily. Moving from one location to another is never a problem. CAS has incorporated only best-in-class technologies so you can count on unmatched reliability, accuracy and performance.

Features
• Fully configured monitor with ECG, Respiration, Temperature, SpO2, NIBP and EtCO2, weighing only 4.4 lbs (2 kg)
• Pulse oximetry choices including Masimo SET® or Nellcor® OxiMax®
• MAXNIBP® (Motion Artifact Extraction) for fast, accurate and reliable blood pressure measurements
• Oridion MicroStream® EtCO2 option for intubated and non-intubated patients
• Wireless (infrared) printer option
• Monitoring for Neonates to Adults
• User removable NiMH battery pack, internal AC power supply and DC power option.

Two main variants of the CAS 750 are available:

	750E Configuration 750E-1 ECG 750E-2 ECG and SpO2 750E-3 ECG, SpO2 and MAXNIBP 750E-3C ECG, SpO2 and EtCO2 750E-4 ECG, SpO2, MAXNIBP and EtCO2

	750C Configuration 750C-2 EtCO2 and SpO2 750C-3 EtCO2, SpO2 and MAXNIBP

SPECIFICATIONS

ECG
Input: 3 or 5 leads
Leads: I, II, III, aVL, aVF, aVR, V
Frequency Response: 0.5 to 40 Hz
Gain: Auto or Selectable (X1, X2, X4 or X8)
Pacer Detection: Yes
Pacer Rejection: Yes

Heart Rate (ECG)
Range: Adult 15-300 BPM, Neonate 15-350 BPM
Accuracy: ± 3 BPM or ± 3%, whichever is greater
Resolution: 1 BPM

Respiration (ECG)
Method: Impedance Pneumography
Range: 0 – 150 BrPM
Accuracy: 0 to122 BrPM ± 1 BrPM, 123 to 150 BrPM ± 2 BrPM
Resolution: 1 BrPM

Temperature
Input: YSI® 400 compatible
Range: 29 °C to 42 °C
(84.2 °F to 107.6 °F)
Accuracy: ± 0.1 °C (± 0.2 °F)
Resolution: 0.1 °C or 0.1 °F

NIBP
Technique: Oscillometric (MAXNIBP® Technology)
Patient Range: Adult – Neonate
Systolic: Adult 30-255 mmHg, Neonate 30-135 mmHg
Diastolic: Adult 15-220 mmHg, Neonate 15-110 mmHg
MAP: Adult 20-235 mmHg, Neonate 20-125 mmHg
Pulse Rate Range: Adult 30-240 BPM, Neonate 40-240 BPM
Accuracy: ± 5 mmHg. Standard deviation no greater than 8 mmHg (meets AAMI 2002 SP-10 requirements)

SpO2
Masimo SET®
Range: 0-100%
Accuracy: Adult 70-100%, ± 2 digits (1 S.D.), Neonate 70-100%, ± 3 digits (1 S.D.)
Pulse Rate Range: 25-240 BPM
Accuracy: ± 3 BPM

Nellcor® OxiMax®
Range: 1-100%
Accuracy: Adult 70-100%, ± 2 digits (1 S.D.), Neonate 70-100%, ± 3 digits (1 S.D.)
Pulse Rate Range: 20-240 BPM
Accuracy: ± 3 digits

EtCO2
Method: Sidestream Capnography (Oridion MicroStream®)
Units: mmHg, % or kPa
Sample Rate: 50 ml/min ± 7.5 ml/min
Range: 0 to 99 mmHg (0-13.2 kPa and 0-13.0 vol% at sea level)
Warm-Up Time: 30 seconds typical, reaches steady state accuracy 20 minutes after power up
Accuracy: 0-38 mmHg ± 2 mmHg, 39-99 mmHg ± 5% of reading
Resolution: 1 mmHg, 0.1 % or 0.1 kPa
Respiration Rate: 0-150 BrPM

Patient Alarms
Adjustable Alarms (High & Low): Heart Rate, %SpO2, Pulse Rate, EtCO2, Respiration Rate, Systolic, Diastolic, No Respiration
Fixed Alarms: Asystole, FiCO2 (> 3 mmHg)
Alarm History: 25 most recent alarms
Indicators: Audible, Yellow Equipment Alarm LED’s, Red Patient Alarm LED’s, and Message Window

Operating Modes
Patient Modes: Neonate or Adult
NIBP Modes: Manual, STAT or automatic (at preset intervals)
Other Modes: Stand-by mode and Sleep Mode

Display
Numerics: HR, PR, %SpO2, NIBP, (Systolic,Diastolic and MAP or PR), EtCO2 (mmHg, % or kPa), RR, Temp (in °F or °C)
Waveforms: Configurable (up to 3) ECG, SpO2, Impedance Resp, CO2
Sweep Speed:
12.5, 25, 50 mm/sec (ECG, SpO2)
3.0, 6.25, 12.5 mm/sec (Resp, CO2)

Physical Dimensions
Fully configured unit with battery
H x W x D: 6.75 in x 8.5 in x 4.0 in
(17.0 cm x 21.5 cm x 10.2 cm)
Weight: 4.4 lbs (2.0 kgs)

Operating Environment
Operating Temperature: 32 °F to 122 °F (0 °C to 50 °C)
Storage Temperature: -4 °F to 140 °F (-20 °C to 60 °C)
Humidity: 15 to 95% RH, non-condensing
Barometric Pressure: 600 to 790
mmHg (80 to 105 kPa)

Power
Source: External AC power or internal battery
AC Power: 100-240 VAC, 50/60 Hz, 0.5A; 0.5A fuse
DC (Optional): 12 VDC
Battery: Smart NiMH battery pack (user removable)
Charge Time: 3-5 hrs
Operating Time: 3 hrs (750E-4 with NIBP at 15 minute intervals)
Chassis Leakage Current: 100 µA (maximum)

Standards
ANSI/AAMI SP-10: 2002
EN 60601-1, EN 60601-1-2, EN 60601-2-27, EN 60601-2-30, EN 60601-20-49, EN 864, EN 865

UL Listed – UL 60601-1, CAN/CSA C22.2 No. 601.1

CE Marking according to Directive 93/42/EEC